2,5-Dichlorophenylzinc iodide solution 0.5M in THF
iodozinc(1+) 2,5-dichlorobenzenide
CAS: 352530-43-9
Molecular Formula: C6H3Cl2IZn
2,5-Dichlorophenylzinc iodide solution 0.5M in THF - Names and Identifiers
| Name | iodozinc(1+) 2,5-dichlorobenzenide |
| Synonyms | (2,5-Dichlorophenyl)iodozinc 2,5-DICHLOROPHENYLZINC IODIDE iodozinc(1+) 2,5-dichlorobenzenide (2,5-dichlorophenyl)zinc(II) iodide 2,5-DICHLOROPHENYLZINC IODIDE, 0.5M SOLU 2,5-Dichlorophenylzinc iodide solution 0.5 in THF 2,5-Dichlorophenylzinc iodide solution 0.5M in THF 2,5-Dichlorophenylzinc iodide 0.5 M in Tetrahydrofuran 2,5-Dichlorophenylzinc iodide, 0.5 M solution in THF, SpcSeal |
| CAS | 352530-43-9 |
| InChI | InChI=1/C6H3Cl2.HI.Zn/c7-5-1-2-6(8)4-3-5;;/h1-3H;1H;/q-1;;+2/p-1/rC6H3Cl2.IZn/c7-5-1-2-6(8)4-3-5;1-2/h1-3H;/q-1;+1 |
2,5-Dichlorophenylzinc iodide solution 0.5M in THF - Physico-chemical Properties
| Molecular Formula | C6H3Cl2IZn |
| Molar Mass | 338.29 |
| Density | 1.031g/mLat 25°C |
| Boling Point | 65°C |
| Flash Point | 1°F |
| Vapor Presure | 1.64mmHg at 25°C |
| Exposure Limit | ACGIH: TWA 50 ppm; STEL 100 ppm (Skin)OSHA: TWA 200 ppm(590 mg/m3)NIOSH: IDLH 2000 ppm; TWA 200 ppm(590 mg/m3); STEL 250 ppm(735 mg/m3) |
| Storage Condition | 2-8°C |
2,5-Dichlorophenylzinc iodide solution 0.5M in THF - Risk and Safety
| Risk Codes | R11 - Highly Flammable R19 - May form explosive peroxides R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed. R36/37/38 - Irritating to eyes, respiratory system and skin. R40 - Limited evidence of a carcinogenic effect R36/37 - Irritating to eyes and respiratory system. |
| Safety Description | S16 - Keep away from sources of ignition. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 - After contact with skin, wash immediately with plenty of soap-suds. S33 - Take precautionary measures against static discharges. S36/37 - Wear suitable protective clothing and gloves. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 2056 3/PG 2 |
| WGK Germany | 1 |
2,5-Dichlorophenylzinc iodide solution 0.5M in THF - Introduction
iodozinc(1 ) 2,5-dichlorobenzenide is a chemical substance with the molecular formula C6H3Cl2I. It is a colorless to slightly yellow crystal with the following properties:
1. Physical properties:
-At room temperature, iodozinc(1 ) 2,5-dichlorobenzenide is a solid and has a crystalline form.
-It has very low solubility, soluble in some organic solvents, such as ether, dimethylformamide, etc.
2. chemical properties:
- iodozinc(1 ) 2,5-dichlorobenzenide can be used as an iodine source and has iodinated electrophilic reactivity.
-It can be used as a catalyst in some organic reactions, such as the formation of carbon-carbon bonds, the synthesis of esters, etc.
3. Application:
- iodozinc(1 ) 2,5-dichlorobenzenide is widely used in the field of organic synthesis. It can be used as an important reaction intermediate for the synthesis of organic compounds.
-It is often used in the substitution reaction of aromatic compounds, acylation reaction, etc.
4. preparation method:
-The general method for preparing iodozinc(1 ) 2,5-dichlorobenzenide is to react 2,5-dichloroiodobenzene with zinc iodide. The reaction takes place under mild conditions and requires the use of appropriate solvents.
5. Safety Information:
- iodozinc(1 ) 2,5-dichlorobenzenide is a chemical that requires careful handling. Wear appropriate personal protective equipment such as lab gloves, goggles when using.
-It should be sealed during use and storage to prevent contact with air and moisture.
-Avoid inhalation, ingestion or skin contact. After use, the relevant equipment and containers should be cleaned in time to avoid the danger caused by residual iodozinc(1) 2,5-dichlorobenzenide.
1. Physical properties:
-At room temperature, iodozinc(1 ) 2,5-dichlorobenzenide is a solid and has a crystalline form.
-It has very low solubility, soluble in some organic solvents, such as ether, dimethylformamide, etc.
2. chemical properties:
- iodozinc(1 ) 2,5-dichlorobenzenide can be used as an iodine source and has iodinated electrophilic reactivity.
-It can be used as a catalyst in some organic reactions, such as the formation of carbon-carbon bonds, the synthesis of esters, etc.
3. Application:
- iodozinc(1 ) 2,5-dichlorobenzenide is widely used in the field of organic synthesis. It can be used as an important reaction intermediate for the synthesis of organic compounds.
-It is often used in the substitution reaction of aromatic compounds, acylation reaction, etc.
4. preparation method:
-The general method for preparing iodozinc(1 ) 2,5-dichlorobenzenide is to react 2,5-dichloroiodobenzene with zinc iodide. The reaction takes place under mild conditions and requires the use of appropriate solvents.
5. Safety Information:
- iodozinc(1 ) 2,5-dichlorobenzenide is a chemical that requires careful handling. Wear appropriate personal protective equipment such as lab gloves, goggles when using.
-It should be sealed during use and storage to prevent contact with air and moisture.
-Avoid inhalation, ingestion or skin contact. After use, the relevant equipment and containers should be cleaned in time to avoid the danger caused by residual iodozinc(1) 2,5-dichlorobenzenide.
Last Update：2024-04-10 22:29:15
